Brush Cleaner & Thinners
Preparation
- No surface preparation required
Application
- To clean brushes: Brush out excess paint.
- Pour contents into a metal container and rinse brushes and equipment thoroughly.
- To keep brushes soft, finally wash in detergent.
- To thin paint for spraying with conventional spray equipment: Use 2 part of Hammerite Metal Paint to 1 part Hammerite Brush Cleaner & Thinners.
- Set spray gun to between 25/35psi (approximately 2 bar).
- Adjust spray to full fan width. Shake spray gun before and during use to ensure an even colour.
Cleaning & Storage
Protect from extremes of temperature and sources of ignition.
Do not empty into drains or watercourses.
