Garage Door Paint
Preparation
- To get the best results, ensure surface is dry and free from loose rust millscale, paint, oil and grease.
- Lightly abrade painted surfaces with a suitable abrasive paper and if necessary a wire brush to remove rust.
- Degrease where necessary with white spirit.
- Prime bare aluminium or galvanised steel with Hammerite Special Metals Primer.
- On areas of bare or rusty steel apply a suitable metal primer. For best results use Hammerite No1. Rustbeater.
One coat is normally sufficient, unless there is a severe colour contrast with the previous coatings
Application
- An ideal application temperature range is 8-25°C.
- Lightly stir before use. Do not mix vigorously.
- Apply 1 or 2 coats of Hammerite Garage Door Paint, depending on colour. Where a strong colour change is required, 2 or more coats will be required. Allow to dry overnight before applying a second coat.
Touch dry in 4 hours, recoatable after 16 hours.
Cleaning & Storage
After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners or white spirit.
Related articles
You may also be interested in the following articles
