Kurust
Preparation
- Clean surface by removing all loose paint and rust, dirt, grease and salt.
- Rinse with clean water and allow time to dry.
Special precautions should be taken to avoid inhalation of dust during surface preparation of pre-1960's paint surfaces as they may contain harmful lead.
Application
- Shake container well and pour required amount into a plastic container.
- By brush: apply direct to rusty area, working well into heavily pitted areas, corners and edges.
- Avoid coating onto painted areas.
- Hammerite Kurust will turn blue/black when reacting with rust.
- If it does not change colour in 1 hour re-apply.
- Apply topcoat after 3 hours.
- Do not replace unused Kurust back into the original container.
See how to use section.
Cleaning & Storage
Clean container with water. Hammerite Kurust should be stored in a dry, well-ventilated area. Protect from frost and direct sunlight.
