Kurust Stone Chip Pencil
Preparation
- Clean surface by removing all loose paint and rust, dirt, grease and salt. Rinse with clean water and allow time to dry.
Special precautions should be taken to avoid inhalation of dust during surface preparation of pre-1960's paint surfaces as they may contain harmful lead.
Application
- Shake container well.
- Using the brush in the cap apply directly onto the rusty area, working well into any pitted areas, corners and edges. Avoid coating onto painted areas.
- Ensure that exposed corners and edges are well treated with Kurust to avoid rust creep beneath the treated area.
- Watch as the Hammerite Kurust turns blue/black whilst reacting with the rust. If the area does not change colour re-apply within 1 hour.
- Apply topcoat after 3 hours. Most solvent based topcoats are suitable. If in doubt test a small area first. Treated surfaces should be top coated as soon as possible.
- Screw cap on tightly immediately after use.
See 'how to use' section.
Cleaning & Storage
Clean any unwanted splahes with water.
