Hammerite Barbecue Paint
Hammerite-Ultimate metal protection.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 400ml covers up to 1 square metre
-
Drying Time Touch dry after 30 minutes, recoat after 15 minutes
-
Coats 4
-
Heat resistant
-
Tough & durable
Product Description
Hammerite Barbecue Paint is specially formulated for the use on the exterior of metal barbecues
Application Description
Ensure barbecue is cool before and during spraying. Lightly abrade the surface to remove loose paint and rust. Remove dirt and grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow to dry. Ideal application temperature range is 8-25°C. Mask off the surrounding area to protect from overspray. To ensure optimum performance store the aerosol at room temperature for at least 2 hours prior to use .Prior to use shake the can vigorously until the agitator ball is heard and then for a further 3 minutes. To avoid runs and sags spray in light even strokes from a distance of about 15cm. Spray a light covering-coat. Apply a further 2-3 coats, allowing 15 minutes between each coat. After application leave the barbecue to dry overnight. Burn off all fumes before cooking food.
Health & Safety
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator