Hammerite Direct To Rust Metal Paint Smooth Finish

Hammerite-Ultimate metal protection.
Zingy Lime
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Smooth finish
  • Coverage 5m2per litre
  • Drying Time Touch dry 1-2 hours, recoatable after 4 hours
  • Coats 2

Product Description

Hammerite Direct to Rust Smooth Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one

Application Description

Ideal application temperature 8°C to 25°C. Lightly stir before use. Do not mix vigorously .Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur.

Health & Safety

Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.

Tips & Advice

  • 1. Preparing the Surfaces
    Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry.Paint a test patch of Hammerite Direct to Rust Metal Paint Smooth onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint.On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint
  • 2. Cleaning
    After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners. Do not use or store in extremes of temperature
Fetching the data, please wait...