Hammerite High Heat Paint

Hammerite-Ultimate metal protection.
Black
Only 1 Colour is Available
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 400ml covers up to 1 square metre
  • Drying Time Touch dry after 30 minutes. Re-coat in 15 minutes
  • Coats 4
Product Features
  • Heat resistant
  • No primer required

Product Description

Hammerite High Heat Paint is a durable, heat resistant protective finish specially formulated to withstand temperatures up to 600°C. Ideal for fire surrounds, boilers, pipework and anywhere a high temperature paint is required

Application Description

Switch off all ignition sources. Ensure surface is cool before and during spraying. Ideal application temperature range is 8-25°C. Mask off the surrounding area to protect from overspray. To ensure optimum performance store the aerosol at room temperature for at least 2 hours prior to use. Prior to use shake the can vigorously until the agitator ball is heard and then for a further 3 minutes.To avoid runs and sags spray in light even strokes from a distance of about 15cm. Spray a light covering-coat. When touch dry (about 30 minutes) apply a further 2-3 coats, allowing 15 minutes between each coat. After application leave the painted surface to dry overnight. Turn aerosol upside down and spray for 2 seconds in between coats and after final use.

Health & Safety

Flame, Exclamation mark Danger Contains Acetone. Extremely flammable aerosol. Pressurised container- May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use. IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F. Dispose of contents and container in accordance with all local, regional, national or international regulations. Repeated exposure may cause skin dryness or cracking.
Download Adobe Reader

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is cool before and during preparation. Lightly abrade the surface to remove loose paint and rust. Remove dirt and grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow to dry

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Sorry, we couldn't find any results
Fetching the data, please wait...