Hammerite Kurust
Hammerite-Ultimate metal protection.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 20-25m2per litre
-
Drying Time Re-coat after 3 hours
-
Coats 1
-
Surface can be topcoated after only 3 hours
-
No need for primer or undercoat
Product Description
Kurust ransforms rust to a sound surface in 15 minutes. Ideal for small areas of rust, stone chips and scratches.
Application Description
Pencil brush - Shake container well.Using the brush in the cap apply directly onto the rusty area, working well into any pitted areas, corners and edges. 100/250ml - Shake container well and pour required amount into a plastic container. By brush: apply direct to rusty area, working well into heavily pitted areas, corners and edges. Avoid coating onto painted areas. Hammerite Kurust will turn blue/black when reacting with rust. If it does not change colour in 1 hour re-apply. Apply topcoat after 3 hours. Do not replace unused Kurust back into the original container.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesClean surface by removing all loose paint and rust, dirt, grease and salt. Rinse with clean water and allow time to dry
-
2. CleaningClean container with water. Hammerite Kurust should be stored in a dry, well-ventilated area. Protect from frost and direct sunlight
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator