No Colour Selected
Hammerite Stonechip Shield Aerosol
Hammerite-Ultimate metal protection.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 600ml covers up to 1.5m2per litre
-
Drying Time 2 hours
-
Coats 2
-
Protects against stones, salt, damp and rust
-
Non-drip formulation
Product Description
Hammerite Stonechip Shield protects your vehicle sills and lower body panels against stonechip damage
Application Description
Spray light even coats from a distance of 25cm-30cm (10-12inches) in a side to side motion keeping the can in an upright position. Extra coats can be applied when dry. Allow 2 hours before overpainting with topcoat. To prevent blockages turn can upside down and spray for 2 seconds between coats and after final use.
Health & Safety
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
Tips & Advice
-
1. Preparing the SurfacesEnsure the surface is clean and dry. Remove loose rust and paint. Abrade surface. Shake can vigorously in a vertical motion for at least 3 minutes after hearing the agitator ball. Mask off the areas not to be sprayed
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator