Hammerite Underbody Seal Schutz
Hammerite-Ultimate metal protection.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 4-5m2per litre
-
Drying Time n/a
-
Coats 1
-
Non-drip super smooth application
-
Free from gritty and abrasive particles
Product Description
Hammerite Underbody Seal gives heavy duty protection for underbody,wheel arches and other high impact areas
Application Description
Do not apply to sump, gearbox, exhaust system, cables or any mechanical parts.Check that spraying equipment is clean and free from blockages.Shake well before use.Spray at a pressure of 5-6 bar (70/90psi) at a distance of 30-50cm (12-20 lnches).Allow to dry overnight.To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesRemove heavy deposits of dirt, grease and oil.Wire brush-off loose rust and paint.Ensure surface is clean and dry
-
2. CleaningTo remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator