No Colour Selected
Hammerite Direct To Rust Metal Paint Satin Finish
Hammerite-Ultimate metal protection.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Satin
-
Coverage 5m2per litre
-
Drying Time Touch dry 1-2 hours, recoatable after 4 hours
-
Coats 2
-
Direct to rust
-
No need for primer or undercoat
Product Description
Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one
Application Description
Ideal application temperature 8°C to 25°C. Lightly stir before use. Do not mix vigorously .Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur.
Health & Safety
"Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour.
May cause drowsiness or dizziness.
Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.
Tips & Advice
-
1. Preparing the SurfacesAbrade smooth surfaces and remove all loose rust and flaking paint with a wire brush
-
2. CleaningAfter use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners. Do not use or store in extremes of temperature
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator