![](https://msp.images.akzonobel.com/prd/dh/eukham/packshots/1319ffea31e983518122ad5c1680a32f.png)
Hammerite Red Oxide Primer
Hammerite-Ultimate metal protection.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 12m2per litre
-
Drying Time Touch dry 2 hours, recoat after 6 hours
-
Coats 2
-
A high performance anticorrosive formulation
-
Quick drying
Product Description
Hammerite Red Oxide Primer is specially formulated for use on both bare and rusty iron and steel.For aluminium, galvanised and all other non-ferrous metals, use Hammerite Special Metals Primer
Application Description
Stir paint thoroughly. For best results when applying by roller, use a short pile mohair roller. Apply 2 coats of Hammerite Red Oxide Primer, allowing a minimum of 6 hours between coats. A topcoat may be applied after a minimum of 6 hours. For best results, allow 24 hours. Hammerite Red Oxide Primer can be overpainted with most paints.
Health & Safety
"Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour.
May cause drowsiness or dizziness
Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.
Tips & Advice
-
1. Preparing the SurfacesAll surfaces must be clean and dry. Remove loose rust, scale and paint with a wire brush then rub down with coarse abrasive paper to provide a firm surface. Abrade bare steel with coarse abrasive paper. Degrease all surfaces with Hammerite Brush Cleaner & Thinners and allow to dry
-
2. CleaningRemove as much paint as possible from equipment before cleaning. For best results use Hammerite Brush Cleaner & Thinners. Hammerite Red Oxide Primer should be stored in a dry well ventilated area. Protect from frost, extremes of temperature and direct sunlight
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
![](/content/dam/akzonobel-common/common-assets/paint-calculator-instructions.png)
![](https://msp.images.akzonobel.com/prd/dh/eukham/packshots/1319ffea31e983518122ad5c1680a32f.png)
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator