Radiator Enamel Satin Aerosol

Looking for a heat resistant satin finish for water-filled radiators and hot water pipes? Hammerite Radiator Enamel Satin is ideal for that. The satin finish can easily be created and lasts long.

  • Prevents yellowing.
  • Tough and durable.
  • Long lasting, but still easy to use.
Available colours
  • White
Colours can look slightly different in real life, due to your monitor
  • Drying time2 hours
  • Usage Interior


  • Interior Metal Surfaces
Radiator Enamel Satin Aerosol can be used for:
  • Radiator


Finish Satin
Coverage 0.5 square metres per litre
Repaintable after 15 minutes

Radiators can bring down the look of your home if they are chipped or discoloured, particularly if you have redecorated the rest of the room they are in. Give them a clean, fresh lease of life with Radiator Paint from Hammerite. It is specially formulated to withstand the heat and reduce the possibility of discoloration. Follow the guide below if you want to know how to paint a radiator:

  1. If the radiator has recently been in use, ensure it has cooled entirely before beginning.
  2. To get the best finish, rub down the radiator with sandpaper and remove all dust and debris afterwards.
  3. If you are painting a bare radiator, use Anti-Rust Primer on the bare metal.
  4. Depending on your preference, the radiator can be painted whilst on or off the wall. If it is being painted whilst on the wall, ensure that the wall behind and floor underneath are fully covered.
  5. Take care not to paint over any valves or knobs in case you accidentally seal them with the paint.
  6. Once you have applied the paint with a good quality brush, leave it to dry thoroughly for a few days before turning the radiator on to harden the surface.

Write a review and help others decide. We will be very grateful.

Store locator

Please note Hammerite is not yet available on-line: you can buy Hammerite in DIY or specialty shops You can find a shop near you:

Available in the following webshops

Loading offers

Place on shopping list Keep track of the products you want to buy

Frequently asked questions

How do I avoid paint sagging?

Apply several thin coats. If applying to a smooth vertical metal surface, abrade the surface with a side to side action using a coarse sandpaper.

View all frequently asked questions

Ask an expert

Got a question that hasn't been answered?

Ask an expert